|
Teclock - Auto-Clutch Test Indicator  - Gauge head can be set at any angle of 220°circle.
- Stem can be adopted to 3 points such as upper, front and back part.
- Gauge head edge is ultra hard ball with less abrasion and gauge head is made of stainless.
- Gauge head and indicator are anti-magnetic are not affected by magnetism
- As miniature bearing (pivot ball bearing) is used for gauge head revolution part bearing, it is not affected by axis decrepit and indication is stable.
- Measuring direction is automatically changed for proper and opposite side by auto-clutch mechanism without change lever. It is always read accurately in any case ,as indicator always rotates in clockwise direction.
Model : LT-352, LT-353, LT-355, LT-358
Teclock - Lever type Test Indicator   Measuring direction is changed by lever change. Gauge head can be set at any angle of 200°circle. - Measuring direction can be changed by switch over lever.
- Main bearing is jewel bearing for all kinds of machines.
- Edge of gauge head is ultra hard ball with less abrasion.
- Gauge head is made of φ2mm stainless and can be easily changed, as this is fitted with original screw.
- Gauge head and indicator are anti-magnetic and not affected by magnetism.
- As this is ……………, this is suitable for thin part.
Model : LT-310, LT-311, LT-314, LT-315, LT-316, LT-370
Teclock - PS type Test Indicator  - Shock from the angle except from measuring direction can be avoided and body is protected by preventing shock mechanism (PS mechanism) of center of gauge head.
Model : LT-315PS, LT-316PS
|
|
Instruments - TecLock. 
